Anthem MCA 525 Gen 2, 5-Channel Power Amplifier with 225W per channel, Advanced Load Monitoring (ALM™), Made in Canada

Description

Experience powerful, precise and immersive home theatre sound with the Anthem MCA 525 Gen 2, a high-performance 5-channel power amplifier engineered and manufactured in Canada.

Delivering 225W per channel at 8Ω, 400W at 4Ω and 600W at 2Ω, the MCA 525 Gen 2 is designed to handle demanding speakers and dynamic movie soundtracks with authority and control.

Featuring Anthem’s exclusive Advanced Load Monitoring (ALM™) technology, a massive toroidal power supply and redesigned internal circuitry, this amplifier delivers clean, low-distortion performance with exceptional reliability.

Its five-channel configuration is ideal for powering the front left, centre, front right and surround speakers in a premium home theatre system.

Key Features

5-Channel Power Amplifier: Designed for high-performance home theatre systems.

Powerful Output: 225W per channel at 8Ω, 400W at 4Ω and 600W at 2Ω.

Advanced Load Monitoring (ALM™): Monitors internal temperature, current and voltage to help protect the amplifier and connected speakers.

Dual Massive Power Supplies: Two large shared power supplies provide power across all five channels, supporting powerful dynamic bursts to individual channels or all channels simultaneously.

Custom Toroidal Transformer: Low-noise, high-power toroidal transformers minimise stray magnetic field radiation.

8 Bipolar Output Devices Per Channel: Distributes the electrical load across multiple output devices to reduce component stress and improve reliability.

Redesigned Internal Circuitry: Reduced internal cabling creates a smoother and more direct signal path.

120dB Signal-to-Noise Ratio: Helps deliver exceptionally quiet background performance.

High-Current Output Design: Engineered to drive demanding low-impedance speaker loads.

Oversized Aluminium Heatsinks: Support effective heat dissipation during operation.

Flexible Power-On Modes: Manual, trigger-controlled and automatic signal-sensing operation.

Premium Speaker Binding Posts: Larger, more conductive binding posts provide secure speaker cable connections.

Reduced Inrush Current: Helps reduce the initial current surge during power-up.

Made in Canada: Engineered and manufactured in Canada.

Complete Technical Specifications

Amplifier Performance

Specification

Details

Model

MCA 525 Gen 2

Series

Anthem MCA Gen 2

Amplifier Type

Power Amplifier

Number of Channels

5

Power Output per Channel (8Ω)

225W RMS

Power Output per Channel (4Ω)

400W RMS

Power Output per Channel (2Ω)

600W RMS

Continuous Power Measurement

20Hz–20kHz, less than 1% THD

Frequency Response (Open Circuit)

20Hz–20kHz ±0.1dB

Frequency Response (8Ω)

20Hz–20kHz ±0.1dB

Frequency Response (4Ω)

20Hz–20kHz ±0.1dB

Frequency Response (2Ω)

20Hz–20kHz ±0.2dB

Power Bandwidth

90kHz (-3dB at 200W into 8Ω)

Input Sensitivity

1.5Vrms (225W into 8Ω)

Input Impedance (RCA)

10kΩ

Input Impedance (XLR)

15kΩ

Voltage Gain

29dB

Slew Rate

30V/μs

Damping Factor

300 (20Hz–1kHz)

Signal-to-Noise Ratio

120dB (IEC-A, reference 225W)

Total Harmonic Distortion at 100W (1kHz)

0.0010%

Total Harmonic Distortion at 100W (20kHz)

0.015%

Intermodulation Distortion – ITU-R

0.0005% at 100W (19kHz + 20kHz)

Intermodulation Distortion – SMPTE

0.002% at 100W (60Hz + 7kHz)

Channel Separation

Greater than 65dB (100Hz–10kHz)

Inputs and Outputs

Connection

Details

Balanced Analogue Inputs

5 × XLR

Unbalanced Analogue Inputs

5 × RCA

Speaker Outputs

5 × Speaker Binding Post Pairs

Trigger Input

3.5mm Mono Mini-Jack

Trigger Output

3.5mm Mono Mini-Jack

Power Connection

IEC C18 Power Cord Inlet

Additional Connections

Chassis Ground Connection

Power-On Modes

Mode

Description

Manual-On

Switch the amplifier on or off using the front-panel power button.

Trigger-On

Remote power control through a 3.5mm trigger connection (5–24V DC input).

Auto-On

Automatically switches on when an input signal is detected and switches off approximately 20 minutes after the input signal stops.

Power Consumption

Operating Mode

Power Consumption

Standby

2.0W

Idle

80W

Typical

550W

High Output

1,200W

Power Requirements

Version

Power Supply Requirement

120V Version

108–132V AC, 60Hz

220–240V Version

198–264V AC, 50/60Hz

Power Supply Type

Single-phase AC

Physical Specifications

Specification

Details

Height

16.9cm (6-5/8″)

Width

43.8cm (17-1/4″)

Depth

46cm (18-1/8″)

Rack-Mounted Height

4U

Weight (Unpacked)

27.5kg (61lbs)

Finish

Black

Country of Manufacture

Canada

Advanced Load Monitoring (ALM™) Technology

Anthem’s exclusive Advanced Load Monitoring technology continuously monitors the amplifier’s internal temperature, current and voltage to help maintain safe and reliable operation.

In the event of an abnormal operating condition, the affected channel can be protected while unaffected channels continue playing. Once normal operating conditions return, full-channel operation automatically resumes.

A front-panel LED provides operating status and protection indications.

Dual Massive Power Supplies – Power on Demand

Unlike many five-channel amplifiers that use separate power supplies, the MCA 525 Gen 2 uses two massive shared power supplies across all five channels.

This design allows the amplifier to deliver powerful bursts of energy to individual channels or all channels simultaneously, helping reproduce demanding movie soundtracks and music with authority.

Premium Internal Construction

The MCA 525 Gen 2 features a custom low-noise toroidal transformer, high-current bipolar output transistors and oversized aluminium heatsinks.

Each channel incorporates eight bipolar output devices, distributing the electrical load across multiple components to reduce stress and support long-term reliability.

Its redesigned internal circuitry also reduces internal cabling, creating a smoother and more direct signal path.

Ideal for High-Performance Home Theatre Systems

The Anthem MCA 525 Gen 2 is designed to complement Anthem AV processors, including the AVM 70 and AVM 90.

Its five-channel configuration makes it suitable for powering the front and surround speakers in a premium home theatre system. Additional MCA amplifiers can be combined to support larger Dolby Atmos and DTS configurations.

Package Contents

1 × Anthem MCA 525 Gen 2 Power Amplifier

1 × Power Cord