Anthem MCA 525 Gen 2, 5-Channel Power Amplifier with 225W per channel, Advanced Load Monitoring (ALM™), Made in Canada
- Description
Description
Experience powerful, precise and immersive home theatre sound with the Anthem MCA 525 Gen 2, a high-performance 5-channel power amplifier engineered and manufactured in Canada.
Delivering 225W per channel at 8Ω, 400W at 4Ω and 600W at 2Ω, the MCA 525 Gen 2 is designed to handle demanding speakers and dynamic movie soundtracks with authority and control.
Featuring Anthem’s exclusive Advanced Load Monitoring (ALM™) technology, a massive toroidal power supply and redesigned internal circuitry, this amplifier delivers clean, low-distortion performance with exceptional reliability.
Its five-channel configuration is ideal for powering the front left, centre, front right and surround speakers in a premium home theatre system.
Key Features
5-Channel Power Amplifier: Designed for high-performance home theatre systems.
Powerful Output: 225W per channel at 8Ω, 400W at 4Ω and 600W at 2Ω.
Advanced Load Monitoring (ALM™): Monitors internal temperature, current and voltage to help protect the amplifier and connected speakers.
Dual Massive Power Supplies: Two large shared power supplies provide power across all five channels, supporting powerful dynamic bursts to individual channels or all channels simultaneously.
Custom Toroidal Transformer: Low-noise, high-power toroidal transformers minimise stray magnetic field radiation.
8 Bipolar Output Devices Per Channel: Distributes the electrical load across multiple output devices to reduce component stress and improve reliability.
Redesigned Internal Circuitry: Reduced internal cabling creates a smoother and more direct signal path.
120dB Signal-to-Noise Ratio: Helps deliver exceptionally quiet background performance.
High-Current Output Design: Engineered to drive demanding low-impedance speaker loads.
Oversized Aluminium Heatsinks: Support effective heat dissipation during operation.
Flexible Power-On Modes: Manual, trigger-controlled and automatic signal-sensing operation.
Premium Speaker Binding Posts: Larger, more conductive binding posts provide secure speaker cable connections.
Reduced Inrush Current: Helps reduce the initial current surge during power-up.
Made in Canada: Engineered and manufactured in Canada.
Complete Technical Specifications
Amplifier Performance
Specification
Details
Model
MCA 525 Gen 2
Series
Anthem MCA Gen 2
Amplifier Type
Power Amplifier
Number of Channels
5
Power Output per Channel (8Ω)
225W RMS
Power Output per Channel (4Ω)
400W RMS
Power Output per Channel (2Ω)
600W RMS
Continuous Power Measurement
20Hz–20kHz, less than 1% THD
Frequency Response (Open Circuit)
20Hz–20kHz ±0.1dB
Frequency Response (8Ω)
20Hz–20kHz ±0.1dB
Frequency Response (4Ω)
20Hz–20kHz ±0.1dB
Frequency Response (2Ω)
20Hz–20kHz ±0.2dB
Power Bandwidth
90kHz (-3dB at 200W into 8Ω)
Input Sensitivity
1.5Vrms (225W into 8Ω)
Input Impedance (RCA)
10kΩ
Input Impedance (XLR)
15kΩ
Voltage Gain
29dB
Slew Rate
30V/μs
Damping Factor
300 (20Hz–1kHz)
Signal-to-Noise Ratio
120dB (IEC-A, reference 225W)
Total Harmonic Distortion at 100W (1kHz)
0.0010%
Total Harmonic Distortion at 100W (20kHz)
0.015%
Intermodulation Distortion – ITU-R
0.0005% at 100W (19kHz + 20kHz)
Intermodulation Distortion – SMPTE
0.002% at 100W (60Hz + 7kHz)
Channel Separation
Greater than 65dB (100Hz–10kHz)
Inputs and Outputs
Connection
Details
Balanced Analogue Inputs
5 × XLR
Unbalanced Analogue Inputs
5 × RCA
Speaker Outputs
5 × Speaker Binding Post Pairs
Trigger Input
3.5mm Mono Mini-Jack
Trigger Output
3.5mm Mono Mini-Jack
Power Connection
IEC C18 Power Cord Inlet
Additional Connections
Chassis Ground Connection
Power-On Modes
Mode
Description
Manual-On
Switch the amplifier on or off using the front-panel power button.
Trigger-On
Remote power control through a 3.5mm trigger connection (5–24V DC input).
Auto-On
Automatically switches on when an input signal is detected and switches off approximately 20 minutes after the input signal stops.
Power Consumption
Operating Mode
Power Consumption
Standby
2.0W
Idle
80W
Typical
550W
High Output
1,200W
Power Requirements
Version
Power Supply Requirement
120V Version
108–132V AC, 60Hz
220–240V Version
198–264V AC, 50/60Hz
Power Supply Type
Single-phase AC
Physical Specifications
Specification
Details
Height
16.9cm (6-5/8″)
Width
43.8cm (17-1/4″)
Depth
46cm (18-1/8″)
Rack-Mounted Height
4U
Weight (Unpacked)
27.5kg (61lbs)
Finish
Black
Country of Manufacture
Canada
Advanced Load Monitoring (ALM™) Technology
Anthem’s exclusive Advanced Load Monitoring technology continuously monitors the amplifier’s internal temperature, current and voltage to help maintain safe and reliable operation.
In the event of an abnormal operating condition, the affected channel can be protected while unaffected channels continue playing. Once normal operating conditions return, full-channel operation automatically resumes.
A front-panel LED provides operating status and protection indications.
Dual Massive Power Supplies – Power on Demand
Unlike many five-channel amplifiers that use separate power supplies, the MCA 525 Gen 2 uses two massive shared power supplies across all five channels.
This design allows the amplifier to deliver powerful bursts of energy to individual channels or all channels simultaneously, helping reproduce demanding movie soundtracks and music with authority.
Premium Internal Construction
The MCA 525 Gen 2 features a custom low-noise toroidal transformer, high-current bipolar output transistors and oversized aluminium heatsinks.
Each channel incorporates eight bipolar output devices, distributing the electrical load across multiple components to reduce stress and support long-term reliability.
Its redesigned internal circuitry also reduces internal cabling, creating a smoother and more direct signal path.
Ideal for High-Performance Home Theatre Systems
The Anthem MCA 525 Gen 2 is designed to complement Anthem AV processors, including the AVM 70 and AVM 90.
Its five-channel configuration makes it suitable for powering the front and surround speakers in a premium home theatre system. Additional MCA amplifiers can be combined to support larger Dolby Atmos and DTS configurations.
Package Contents
1 × Anthem MCA 525 Gen 2 Power Amplifier
1 × Power Cord










