Powersoft T304 4-Channel Power Amplifier
Features:
- The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium-sized systems and stage monitors. The T Series can be controlled and configured in different ways.
- Full control with a PC running Armonía.
- Control from the front panel display for features like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring parameters.
- Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point for easy control.
- Group controllable advanced EQ with raised cosine filters
- Large preset library
- Preset compatibility with X Series
- Very long FIR filters (42.6 ms)
- Control and monitoring through ArmoníaPlus
- Description
- Specification
Description
Overview
The T Series is a very flexible and cost-effective amplifier platform with loudspeaker processor.
All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.
The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end, a WiFi access point at the other end and the amplifiers in-between.
SPECIFICATIONS:
GENERAL
Output power per channel
| Output power per channel | 750W @ 2 Ω | 750 W @ 4 Ω | 750 W @ 8 Ω |
| Bridge mode | 1500 W @ 4 Ω | 1500 W @ 8 Ω |
Max output voltage / current
| Max unclipped output voltage @8 Ω | 145 Vpeak | ||
| Current | 50 Apeak |
AC MAIN POWER
| Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) | ||
| Nominal power requirement | 100-240 V ±10%, 50-60 Hz | ||
| Operating voltage | 90 V – 264 V | ||
| Power consumption/ Current draw | |||
| 1/8 of max output power @ 4 Ω | 120 V: 537 W – 4.7 A | 230 V: 525 W – 2.7 A | |
THERMAL
Thermal dissipation
| 1/8 of max output power @ 4 Ω | 120 V: 537 BTU/h -135.3 kcal/h | 230 V: 512 BTU/h -129.0 kcal/h |
